Clover 109 Diamond Extra Wet Look Floor,Polish (2 5 Litre)

Enjoy a highly-polished, non-slip floor with this floor polish from Clover. The formula can be used on all types of water-resistant flooring, to apply and maintain a highly professional, long lasting finish. Great for bars, restaurants and cafes, to maintain its appearance and reduce maintenance costs.

Clover 109 Diamond Extra Wet Look Floor Polish is ready-to-use, it is quick and easy to apply, therefore, freeing up staff to carry on with more pressing tasks.

Clover 109 Diamond Extra Wet Look Floor Polish is a high quality acrylic polymer-based metallised floor polish, which dries to a deep gloss and burnishes to an outstanding ‘wet look’ finish, with excellent slip resistance.

Clover 109 Diamond Extra Wet Look Floor Polish Features:

• An ultra modern polish, which offers gloss, ultimate durability, and the perfect base to clean, protect and prolong the life of a floor.
• Suitable for use on non-porous floors, including; vinyl, thermoplastic, linoleum, rubber, asphalt, sealed wood, marble and terrazzo.
• Recommended for use in schools, colleges, hotels, offices, airports, factories, shops, shopping centres, ferries, bars, nightclubs and pubs.
• High quality 'wet look' shine for improved appearance
• Thermoplastic polymer protects the floor
• Builds good slip-resistance - no health and safety concerns
• For interior use only.

Clover 109 Diamond Extra Wet Look Floor Polish Preparation:

• To obtain optimum results, it is important that thorough preparation of the floor is undertaken.
• The floor must be thoroughly cleaned to remove all dirt, grease and old polish films by using a quality polish remover such as Clover
• Chemicals' Remove Or Zip Strip.
• The floor must be well rinsed with water and allowed to dry before applying Diamond Extra.

Clover 109 Diamond Extra Wet Look Floor Polish Application:

• Apply a thin film of Diamond Extra (undiluted) using a mop or polish applicator.
• Drying time is normally around 30 minutes.
• Apply a second coat and allow to dry. Coverage is dependent on the porosity of the floor covering.
• In general, 5 litres of Diamond Extra will cover approximately 300 square metres of floor.
• N.B. It may take up to 24 hours for Diamond Extra to achieve full hardness